| Kode VDI | Parameter Teknis | Nilai Spesifikasi OEM (FG30HT-16) |
|---|---|---|
| 1.1 | Merek / Brand | Komatsu Forklift |
| 1.1a | Pabrikan (Manufacturer) | Komatsu Ltd. |
| 1.2 | Designasi Kode Model | Komatsu FG30HT-16 |
| VDI.4 | Tipe Unit | BX50 Series High-Power IC Pneumatic LPG / Dual-Fuel Forklift |
| 1.2b | Kategori Alat | Komatsu IC Pneumatic LPG / Dual-Fuel Forklifts |
| 1.5 | Kapasitas Beban Utama (Load Capacity) | 3.000 kg (3.0 Ton / 6.000 lbs) |
| 1.6 | Titik Beban (Load Centre) | 500 mm (24 in) |
| VDI.8 | Tinggi Angkat (Lift Height) | 3.300 – 6.500 mm |
| 1.3 | Sistem Penggerak / Power Source | Komatsu K25 High-Output Electronic Fuel-Injected LPG / Dual-Fuel Engine |
| VDI.10 | Operation type | Sit-Down |
| VDI.11 | Wheelbase (mm) | 1 700 |
| VDI.12 | Wheelbase (in) | 66.9 |
| VDI.13 | Load distance from center axle (2 stage)(in) | 19.1 |
| VDI.14 | Load distance from center axle (2 stage)(mm) | 485 |
| VDI.15 | Relief pressure, maximum (psi) | 2,630 |
| VDI.16 | Relief pressure, maximum (bar) | 181 |
| VDI.17 | Sound level (dB) | 83 |
| VDI.18 | Transmission | Powershift |
| 5.1 | Travel speed, loaded/unloaded (mph) | 11.5 / 12.1 |
| 5.1 | Travel speed, loaded/unloaded (kph) | 18.5 / 19.5 |
| VDI.21 | Lifting speed when loaded/unloaded (mm/s) | 530 / 630 |
| VDI.22 | Lifting speed when loaded/unloaded (fpm) | 104 / 124 |
| VDI.23 | Lowering speed when loaded/unloaded (fpm) | 98 / 98 |
| VDI.24 | Lowering speed when loaded/unloaded (mm/s) | 500 / 500 |
| VDI.25 | Maximum drawbar pull, loaded (kN) | 20.6 |
| VDI.26 | Maximum drawbar pull, loaded (lbs) | 4,600 |
| VDI.27 | Service brake, operation/control | Foot / Hydraulic |
| VDI.28 | Parking brake, operation/control | Hand / Mechanic |
| VDI.29 | Steering type | FHPS |
| VDI.30 | Maximum torque (SaE net)(Nm) | 152 Nm @ 2 000 rpm |
| VDI.31 | Maximum torque (SaE net)(lbs-ft) | 136 lbs.-ft. @ 2,000 rpm |
| VDI.32 | Rated output (SaE Net) (HP) | 60 HP @ 2,700 rpm |
| VDI.33 | Rated output (SaE Net) (kW) | 44 kW @ 2 700 rpm |
| VDI.34 | Engine manufacturer / model | GCT / GK25 |
| VDI.35 | Fuel tank capacity (L) | 58 |
| VDI.36 | Fuel tank capacity (US gal) | 15.3 |
| VDI.37 | Ground clearance, center of wheelbase (mm) | 190 |
| VDI.38 | Ground clearance, center of wheelbase (in) | 7.5 |
| 4.35 | Tilting angle, 2-Stage (FV) masts, forward/backward | 6 / 12 |
| 4.35 | Tilting angle, 3-Stage (TFV) masts, forward/backward | 6 / 5 |
| VDI.41 | Length to fork face (in) | 106.7 |
| VDI.42 | Length to fork face (mm) | 2 710 |
| VDI.43 | Forks, thickness x width x length (in) | 2 x 5 x 42 |
| VDI.44 | Forks, thickness x width x length (mm) | 50 x 125 x 1 070 |
| VDI.45 | Carriage width/ITa class (mm) | 1 041 mm / III |
| VDI.46 | Carriage width/ITa class (in) | 41 in / III |
| VDI.47 | Ground clearance under mast (mm) | 140 |
| VDI.48 | Ground clearance under mast (in) | 5.5 |
| VDI.49 | Free lift height (in) | 5.5 |
| VDI.50 | Free lift height (mm) | 140 |
| VDI.51 | Height overhead guard (in) | 83.9 |
| VDI.52 | Height overhead guard (mm) | 2 130 |
| VDI.53 | Mast height - lowered (in) | 85.5 |
| VDI.54 | Mast height - lowered (mm) | 2 170 |
| VDI.55 | Mast height - extended (in) | 176 |
| VDI.56 | Mast height - extended (mm) | 4 470 |
| VDI.57 | Turning radius, outside (mm) | 2 370 |
| VDI.58 | Turning radius, outside (in) | 93.3 |
| VDI.59 | Maximum fork height (mm) | 3 250 |
| VDI.60 | Maximum fork height (in) | 128 |
| VDI.61 | Overall width at drive tires (in) | 48.6 |
| VDI.62 | Overall width at drive tires (mm) | 1 235 |
| VDI.63 | Right angle stacking aisle (mm) | 2 855 |
| VDI.64 | Right angle stacking aisle (in) | 112.4 |
| VDI.65 | Length, with standard forks (in) | 148.8 |
| VDI.66 | Length, with standard forks (mm) | 3 780 |
| VDI.67 | Tire type details | Pneumatic |
| VDI.68 | Number of wheels, front/rear | 2x / 2 |
| VDI.69 | Tire size - front | 28 x 9 - 15 - 12PR (I) |
| VDI.70 | Tire size - rear | 6.5 - 10 - 10PR |
| VDI.71 | Tread - front (in) | 40.4 |
| VDI.72 | Tread - front (mm) | 1 025 |
| VDI.73 | Tread - rear (in) | 38 |
| VDI.74 | Tread - rear (mm) | 965 |
| VDI.75 | Axle loading - loaded front (kg) | 6 130 |
| VDI.76 | Axle loading - loaded front (lbs) | 13,510 |
| VDI.77 | Axle loading - loaded rear (lbs) | 1,910 |
| VDI.78 | Axle loading - loaded rear (kg) | 865 |
| VDI.79 | Axle loading - unloaded front (kg) | 1 635 |
| VDI.80 | Axle loading - unloaded front (lbs) | 3,600 |
| VDI.81 | Axle loading - unloaded rear (kg) | 2 635 |
| VDI.82 | Axle loading - unloaded rear (lbs) | 5,810 |
| 2.1 | Service weight (kg) | 4 270 |
| 2.1 | Service weight (lbs) | 9,410 |
| VDI.85 | Low profile dash display | Fuel Gauge, Water Temperature Gauge and Hour Meter |
| VDI.86 | Tires | Drive, Lug CushionSteer, Lug Cushion |
| VDI.87 | Masts | 2-Stage, 3-Stage & 4-Stage |
| VDI.88 | FORKS | 915 mm1,070 mm1,220 mm1,370 mm1,520 mm1,820 mm |
| 8.1 | Sektor Operasional Ideal | Gudang Semi-Outdoor, Kawasan Industri Manufaktur, Pusat Distribusi, Bongkar Muat Truk/Kontainer & Yard Logistik |
| 8.3 | Kepatuhan K3 & Sertifikasi | Standar EPA Tier 4 Final / EU Stage V / ISO9001 & Siap Riksa Uji SILO K3 Kemnaker RI |
| 8.4 | Cakupan Garansi Resmi | Garansi Resmi Unit & Komponen Utama Standar Komatsu Ltd. |
| 8.5 | Dealer, PDI & Layanan Purna Jual | PT. Cemerlang Perkasa Teknologi (Central Workshop Cakung & Layanan Nasional 38 Provinsi) |
Karakteristik Rancang Bangun & Keunggulan Konstruksi Komatsu (Komatsu FG30HT-16): Enhanced safety for employees and goods: The Komatsu Operator Presence System (KOPS) Plus, standard with BX50 series, locks out lift, lower, tilt and travel functions when the operator leaves the seat for more than three seconds. The forks cannot lower while High-efficiency drivetrain: Our expertise in construction is behind the BX50’s full floating drive train. High torque delivered by powerful engines is channeled through a heat dissipating aluminum transmission case and a rugged dust- and Diproduksi sesuai standar global Komatsu Ltd. , unit Komatsu FG30HT-16 BX50 Series High-Power IC Pneumatic LPG / Dual-Fuel Forklift (3.000 kg) mengintegrasikan struktur sasis industri berkekuatan tinggi pada kategori Komatsu IC Pneumatic LPG / Dual-Fuel Forklifts , sistem penggerak Komatsu K25 High-Output Electronic Fuel-Injected LPG / Dual-Fuel Engine yang handal dan hemat energi, serta kontrol presisi untuk keamanan dan produktivitas siklus kerja di Indonesia.
Sebagai Authorized Dealer & Distributor Resmi Komatsu Forklift di Indonesia, PT Cemerlang Perkasa Teknologi memastikan setiap unit Komatsu FG30HT-16 — BX50 Series High-Power IC Pneumatic LPG / Dual-Fuel Forklift 3.000 kg melewati tahapan Pre-Delivery Inspection (PDI) 48 titik di fasilitas Central Workshop Cakung, Jakarta Utara sebelum dikirim ke lokasi operasional pelanggan. Tersedia pula referensi silang di portal induk Komatsu FG30HT-16 — BX50 Series High-Power IC Pneumatic LPG / Dual-Fuel Forklift 3.000 kg di www.cepet.co.id.
Fitur Unggulan Komatsu FG30HT-16 #1: Enhanced safety for employees and goods: The Komatsu Operator Presence System (KOPS) Plus, standard with BX50 series, locks out lift, lower, tilt and travel functions when the operator leaves the seat for more than three seconds. The forks cannot lower while
Fitur Unggulan Komatsu FG30HT-16 #2: High-efficiency drivetrain: Our expertise in construction is behind the BX50’s full floating drive train. High torque delivered by powerful engines is channeled through a heat dissipating aluminum transmission case and a rugged dust- and
Fitur Unggulan Komatsu FG30HT-16 #3: Multiple solutions to reduce operator fatigue: The fully hydrostatic power steering (FHPS) system offers you easy steering even at slow speeds and is engineered to eliminate kickback. Further improving operator feel are a small-diameter steering wheel
Fitur Unggulan Komatsu FG30HT-16 #4: Advanced ergonomic design: Designed to improve operator comfort and reduce fatigue, the Komatsu Komfort Zone is a dual floating structure: dampening mounts protect the frame from engine vibration; additional mounts isolate
Fitur Unggulan Komatsu FG30HT-16 #5: Angled ports to manage exhaust and dust: Hot engine air, dust and exhaust can affect operators over time. The BX50 series’ angled exhaust ports in the counterweight aim exhaust away while traveling in reverse. Exhaust vents low on the counterweight
Fitur Unggulan Komatsu FG30HT-16 #6: Excellent sightlines front and rear: An unrestricted view of the fork tips and surroundings for the operator. The thoughtfully designed EZ view mast, console and low-profile dash provide outstanding forward visibility. Upper corners of the
Unit Komatsu FG30HT-16 — BX50 Series High-Power IC Pneumatic LPG / Dual-Fuel Forklift 3.000 kg (Seri Komatsu BX50 IC Pneumatic LPG) pada divisi Komatsu IC Pneumatic LPG / Dual-Fuel Forklifts memiliki kapasitas beban terukur 3.000 kg (3.0 Ton / 6.000 lbs) pada titik beban (Load Centre) 500 mm (24 in), tinggi angkat standar 3.300 – 6.500 mm, berat operasional 4 270 kg, radius putar 2 370 mm, dan ditenagai sistem penggerak Komatsu K25 High-Output Electronic Fuel-Injected LPG / Dual-Fuel Engine.
Ya. PT Cemerlang Perkasa Teknologi menyediakan Komatsu FG30HT-16 — BX50 Series High-Power IC Pneumatic LPG / Dual-Fuel Forklift 3.000 kg dalam kondisi 100% baru bergaransi resmi standar Komatsu Forklift (Komatsu Ltd.), lulus Pre-Delivery Inspection (PDI) 48 titik di Central Workshop Cakung, siap sertifikasi Riksa Uji K3 SILO Kemnaker RI, serta tersedia dalam skema pembelian unit baru maupun kontrak sewa/rental korporasi jangka panjang (12–60 bulan) di seluruh 38 provinsi Indonesia.
Seluruh komponen fast-moving, filter, seal hidrolik, modul kontroler AC, roda polyurethane/solid tyre, dan suku cadang mesin/elektrikal orisinal untuk Komatsu FG30HT-16 — BX50 Series High-Power IC Pneumatic LPG / Dual-Fuel Forklift 3.000 kg tersedia di gudang suku cadang Central Cakung Jakarta Utara dengan dukungan armada Mobile Service Workshop 24/7.
| Kapasitas Beban | 5.000 kg (5.0 Ton / 11.000 lbs) |
|---|---|
| Tinggi Angkat / LC | 3.000 – 6.000 mm (LC 600 mm (24 in)) |
| Sistem Penggerak | LPG / Dual-Fuel (TB45) (Seri Komatsu CX50 Heavy-Duty LPG) |
| Kapasitas Beban | 4.500 kg (4.5 Ton / 10.000 lbs) |
|---|---|
| Tinggi Angkat / LC | 3.000 – 6.000 mm (LC 600 mm (24 in)) |
| Sistem Penggerak | LPG / Dual-Fuel (TB45) (Seri Komatsu CX50 Heavy-Duty LPG) |
| Kapasitas Beban | 4.000 kg (4.0 Ton / 9.000 lbs) |
|---|---|
| Tinggi Angkat / LC | 3.000 – 6.000 mm (LC 600 mm (24 in)) |
| Sistem Penggerak | LPG / Dual-Fuel (TB45) (Seri Komatsu CX50 Heavy-Duty LPG) |
